Magnetic Security Door Lock Access Control System | Heartz Bangla Ltd.

Magnetic Security Door Lock Access Control System

//Magnetic Security Door Lock Access Control System

Magnetic Security Door Lock Access Control System

Magnetic Security Door Lock Access Control System

Magnetic Security Door Lock Access Control System The door to open the door and open the door of the embedded installation method for the wooden door, if the door block size enough to embed the main lock, then the installation is very simple, just dig a suitable Slot, lock into the lock after the lock can be, the general construction staff will see the lock will be installed. Aluminum door doors are generally hollow, for this feature, we designed two installation door lock access control system methods.

  1. Lined with wood method (please refer to the figure): in the door frame into a suitable size for the lining of wood, then lock the screws. This method is easy to use, easy to install. Most of the actual installation of this method.
    1. Use the mounting kit method: This method is to use our accessories (four-hole iron plate + U-type iron), so that the installation easier.

    Function: power on the lock, no residual magnetic, no mechanical wear, single door. The LED indication applies to any frame door that is open at 90 degrees

DESCRIPTION:

1. Collinear Load Test 280kg
2. Dual Voltage 12 or 24 VDC(optional).
3. The Standad Voltage is 12VDC when Finished.
4. MOV Provides Reverse Current Protection.
5. Anti-Residual Magneism Designed.
6. High Strength Material,Anodized Aluminum Housing.
7. Design with no Mechanical Bolt.
8. Increase the holding Force,Dual Insulative Hosing.
9. CECertificate by European Union,MA Certificate by China Public Security Office.
Suitable for door type: wooden door, glass door, metal door, fire door
■ Surface temperature: less than ambient temperature + 20 ℃
■ Applicable temperature: -10 ~ +50 ℃ (14-131F)
■ Applicable humidity: 0 ~ 95% (Relative humidity )
■ Shell treatment: Anodized hardening plating

■ Lock body treatment: environmentally friendly zinc plating treatment
■ Suction plate treatment: environmentally friendly zinc plating
■ built-in reverse current protection device (MOV)
■ anti-debris design, use anti-
■ magnetic lock no mechanical failure, the full use of electromagnetic suction work
■ increase the electromagnetic suction, professional design, double lock insulation treatment

SPECIFICATIONS:

Product Parameter Parameter Description
Size 170L*42W*21H(mm)
Armature Plate Dimension 130L*33W*9H(mm)
Holding Force 280kg
Input Voltage 12 or 24VDC
Current 12V/300mA or 24V/150mA
signal output No
Operating Temp -10~+55℃(14-131F)
Humidity 0~90%(non-condensing)
Cover Finish Anodized aluminum
Lock Finish Zinc
Armature Plate Finish Zinc
Weight 1.2KG

More Products 

By | 2019-02-12T04:19:33+00:00 December 14th, 2018|Access Control|0 Comments

About the Author:

Leave A Comment